SCS Conveyor Systems
SCS PrecisionAdvance
The SCS PrecisionAdvance conveyor provides exceptional product handling and efficient step integration, which are often required for conformal coating and dispensing processes.
Product Information
The SCS PrecisionAdvance conveyor can fully integrate with SCS PrecisionCoat and PrecisionCure systems to provide a comprehensive solution, enabling line management and automating and streamlining the movement of circuit boards through the manufacturing process.
Available in four configurations, the pin-type-edge handling conveyor is designed to control board inspection, line flow and transit throughout the coating and assembly operation. SCS’ modular systems integrate with the PrecisonCoat’s control software and can be assembled to create a custom line of conveyor, coating and curing systems to meet manufacturing needs.
System Features
• Pin-type-edge handling conveyor
• Left to right conveyor travel
• Fixed front rail
• Separate load and unload speeds
• PrecisionCoat software integration
• Manual width adjust
• No front brace
• IEC power inlet
• Audible fault alarm
Optical sensor at end of conveyor
SMEMA interface
Optional Features
- Reverse operation (right to left)
- Auto width adjust
- Storage box
- Print/drawing easel
- Fold-down shelf
- 3/16-inch conveyor chain
- Enclosure hood with overhead blacklight
Configurations
• Line-load conveyor
• Pass-through conveyor
• Inspection conveyor
• Accumulation conveyor/buffer
Specifications
220V / 50-60 Hz / 1 Amp
39.4 in / 1.0 m
1.0 -10.0 in/sec / 1.52-15.24 m/min in 1.0 in/sec / 1.52 m/min increments
Max: 20 in / 50.8 cm
