News & Events
News

SCS keeps you covered

Welcome to the SCS Newsroom. This is where you can find news and updates regarding our company, services and technology.

Recent News
February 25, 2019

Specialty Coating Systems Signs on New Representation for MI, OH and KY

February 25, 2019 (Indianapolis, IN) – Specialty Coating Systems today announced the appointment of Quality Associates as its newest manufacturers’ representative. Based in Michigan, the agency will represent SCS’ PrecisionCoat spray and dispense line, cure ovens and ionic contamination test systems in the states of Michigan, Ohio and Kentucky. Quality Associates was started in 1990 Read More >>

January 31, 2019

Specialty Coating Systems Announces Lynxtron as 2018 Representative of the Year during APEX

January 31, 2019 (Indianapolis, IN) – Specialty Coating Systems is pleased to announce that it awarded Lynxtron, Inc. ‘2018 Representative of the Year’ during the 2019 IPC APEX EXPO. Lynxtron has been representing SCS since 2011 in the states of Illinois, Indiana and Wisconsin, selling its PrecisionCoat spray and dispense line, cure ovens and ionic Read More >>

January 8, 2019

Specialty Coating Systems Develops New Halogen-Free Parylene Coating

January 8, 2019 (Indianapolis, IN) – Specialty Coating Systems is pleased to announce that the company has developed a new halogen-free variant of Parylene – ParyFree®. With a notable history of anticipating and responding to industry trends and regulations, SCS developed ParyFree in support of the global initiatives that continue to drive toward the elimination Read More >>

January 3, 2019

Specialty Coating Systems to Show New Programmable Valve Spacing Feature on the Precisioncoat V at APEX

January 3, 2019 (Indianapolis, IN) – Specialty Coating Systems has announced plans to exhibit in Booth #2601 at the 2019 IPC APEX EXPO, scheduled to take place Jan. 29 – 31, 2019 at the San Diego Convention Center in California. The company will provide demonstrations of its PrecisionCoat V with both the new programmable valve Read More >>

See More News >>
November 15, 2018

Specialty Coating Systems to Exhibit at the Consumer Electronics Show

November 15, 2018 (Indianapolis, IN) – Specialty Coating Systems has announced plans to exhibit at the Consumer Electronics Show (CES), scheduled to take place Jan. 8-11, 2019 in Las Vegas, NV. The company will exhibit its Parylene coating services and technologies in Booth #62204. CES is the world’s gathering place for all those who thrive Read More >>

November 8, 2018

Specialty Coating Systems Goes to the High Reliability Cleaning and Conformal Coating Conference

November 8, 2018 (Indianapolis, IN) – Specialty Coating Systems today announced its participation at the High Reliability Cleaning and Conformal Coating Conference, scheduled to take place Nov. 13-15, 2018 at the Chicago Marriott Schaumburg in Il. Presented by IPC and SMTA, The Cleaning and Conformal Coating Conference is attended by industry leaders and subject matter Read More >>

October 26, 2018

SCS to Present “Solving Harsh Environment Protection Challenges with Parylene Coatings” during Tech Briefs Webinar

October 26, 2018 (Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will participate in a Tech Briefs webinar on Wednesday, Nov. 28, 2018 at 2 p.m. EST. The webinar, entitled, “Solving Harsh Environment Protection Challenges with Parylene Coatings,” will be presented by SCS’ Tim Seifert, Aerospace & Defense Market Manager, Read More >>

September 18, 2018

Specialty Coating Systems to Present during Machine Design Webinar

September 18, 2018 (Indianapolis, IN) – Specialty Coating Systems is pleased to announce that it will participate in the upcoming Machine Design Webinar on Thursday, Sept. 27, 2018 at 2 p.m. EDT. The webinar, entitled “An Advanced Conformal Coating Technology for Leading Edge Technologies,” will be presented by Tim Seifert, Aerospace & Defense Market Manager, Read More >>

September 10, 2018

Specialty Coating Systems Introduces New PrecisionCoat Automatic Quick Change at SMTAI

September 10, 2018 (Indianapolis, IN) – Specialty Coating Systems has announced plans to exhibit at SMTA International, scheduled to take place Oct. 16-17, 2018 at the Donald Stephens Convention Center in Rosemont, IL. The company will provide demonstrations of its SCS PrecisionCoat Automatic Quick Change Feature (AQC) in Booth #331. The PrecisionCoat’s AQC feature allows Read More >>

May 10, 2018

Specialty Coating Systems Announces New Dates for Educational Parylene Seminars in Malaysia and Singapore

May 10, 2018 (Indianapolis, IN) – Specialty Coating Systems today announced a date change for its upcoming free, educational Parylene conformal coating seminars. The Singapore seminar will now be held on Thursday, July 19, 2018, and the seminar in Penang, Malaysia will take place Tuesday, July 24, 2018. Ultra-thin, pinhole-free Parylene conformal coatings offer beneficial Read More >>

April 10, 2018

Specialty Coating Systems Offers Educational Parylene Seminars in Malaysia and Singapore

(Indianapolis, IN) – Specialty Coating Systems is pleased to announce free, educational Parylene conformal coating seminars in Penang, Malaysia, on Monday, May 14, 2018, and in Singapore on Tuesday, May 15, 2018. These half-day seminars introduce Parylene conformal coatings and their beneficial properties for the medical device, electronics, transportation, defense and aerospace industries. An SCS Read More >>

March 28, 2018

SCS to Exhibit Its MIL-I-46058 Qualified Parylene Conformal Coatings at DSA

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will exhibit in Booth 10490 at DSA Malaysia, scheduled to take place April 16-19, 2018 at Kuala Lumpur in Malaysia. SCS will exhibit its Parylene conformal coatings, designed for the military, electronics, aerospace, automotive and medical device industries. Numerous components, including circuit Read More >>

February 16, 2018

Wisconsin Lt. Governor Rebecca Kleefisch Tours SCS Facility to Promote WI Aerospace Industry

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that Wisconsin Lt. Governor Rebecca Kleefisch toured its facility on Tuesday, February 13, 2018, as part of her effort to showcase Wisconsin’s aerospace industry. Lt. Governor Kleefisch is Chairman of the Aerospace States Association, an advocacy group for the industry cluster when it comes Read More >>

January 24, 2018

SCS Announces Conformal Coating Line-up for APEX

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce plans to exhibit in Booth #2307 at the 2018 IPC APEX EXPO, scheduled to take place Feb. 27 – March 1, 2018 at the San Diego Convention Center. The company will showcase its conformal coating line up, including the PrecisionCoat V, PrecisionCoat BT, Omegameter Read More >>

December 4, 2017

SCS to Discuss How Ultra-Thin Conformal Coatings Increase the Reliability of Critical Electronics during PennWell Webinar

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will participate in a PennWell webinar on Tuesday, Dec 12, 2017 at 2 p.m. EST. SCS’ Tim Seifert, Military & Avionics Market Manager, and Rakesh Kumar, Ph.D., Vice President of Technology, will present: “Ultra-thin, Lightweight Conformal Coating Protection Increases the Reliability of Read More >>

October 10, 2017

Specialty Coating Systems Debuts New-Generation Omegameter SMD 650 Ionic Testing System

(Indianapolis, IN) – Specialty Coating Systems (SCS) announced today the launch of the Omegameter SMD 650, the next-generation, software-controlled Omegameter ionic contamination test system. A self-contained system, the Omegameter is an industry standard for accurate, efficient and practical quality assurance testing. The system identifies the presence of ionic contamination on bare and assembled printed circuit Read More >>

October 4, 2017

SCS to Exhibit at Compamed – Trade Fair for Suppliers and Manufacturers of Medical Technologies

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will exhibit in Stand F19.1 at Compamed, scheduled to take place November 13-16, 2017 in Düsseldorf. SCS will exhibit biocompatible Parylene conformal coatings for the medical device industry. At the show, SCS Medical Market Manager Dick Molin will present “Parylene Conformal Coatings Read More >>

September 19, 2017

SCS Webinar to Address the Use of Parylene for Increased Reliability

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will conduct a webinar on Tuesday, Oct. 3, 2017 at 2 p.m. EDT. The webinar, entitled, “The Use of Parylene as an Advanced Conformal Coating for Increased Reliability,” will be presented by SCS’ Dick Molin, Medical Market Manager, and Rakesh Kumar, Ph.D., Read More >>

September 15, 2017

More Flexible Coating – See the SCS PrecisionCoat Tool Changer at SMTAI

(Indianapolis, IN) – Specialty Coating Systems (SCS) today announced plans to show the SCS PrecisionCoat Tool Changer at SMTA International scheduled to take place Sept. 19-20, 2017 at the Donald Stephens Convention Center in Rosemont, IL. The flexible, advanced coating feature on SCS’ PrecisionCoat V platform will be available for demonstrations in Booth #1006. In Read More >>

September 15, 2017

The Leader in Parylene Conformal Coatings Will Exhibit at Medtec China

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will exhibit in Booth M301 at Medtec China, scheduled to take place Sept. 20-22, 2017 at the Shanghai World EXPO Exhibition & Convention Center. SCS will exhibit its Parylene conformal coatings, designed for the medical device, electronics, military, aerospace and automotive industries. Read More >>

June 20, 2017

SCS to Present ‘Using Conformal Coatings to Mitigate System Failures’ during upcoming Webinar

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will participate in a Machine Design-sponsored webinar on Thursday, July 27, 2017 at 2 p.m. EDT. The webinar, entitled “Using Conformal Coatings to Mitigate System Failures,” will be presented by SCS’ Tim Seifert, Military & Avionics Market Manager, and Rakesh Kumar, Ph.D., Read More >>

May 1, 2017

SCS to Present ‘Parylene Conformal Coatings: Increasing the Reliability of Complex Technologies’ during ASME Webinar

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will participate in a Mechanical Engineering-sponsored webinar on Thursday, May 18, 2017 at 2 p.m. EDT. The webinar, entitled, “Parylene Conformal Coatings: Increasing the Reliability of Complex Technologies,” will be presented by SCS’ Dick Molin, Sr. Medical Market Specialist and Dustin England, Read More >>

April 24, 2017

SCS Presents at the SMTA Contamination, Cleaning and Coating Conference in Amsterdam

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will exhibit and present during the SMTA Contamination, Cleaning and Coating Conference, scheduled to take place May 22-24, 2017, in Amsterdam. SCS will exhibit its industry-leading Parylene conformal coatings that protect a wide range of components and devices in the electronics, automotive, Read More >>

April 19, 2017

SCS to Present Parylene Nanostructures and Coatings at IMAPS Micro/Nano-Electronics Packaging & Assembly

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will exhibit at the 2017 IMAPS Micro/Nano-Electronics Packaging and Assembly (MiNaPAD) Forum, scheduled to take place May 17-18, 2017, in Grenoble, France, at the WTC congress center. The company will exhibit its industry-leading Parylene conformal coatings and SCS Vice President of Technology Read More >>

March 9, 2017

SCS to Exhibit Parylene Conformal Coatings at NEPCON China

(Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will exhibit in Booth 1A10 at NEPCON China, scheduled to take place April 25-27, 2017, at the Shanghai World EXPO Exhibition & Convention Center. SCS will exhibit their industry-leading Parylene conformal coatings, which protect a wide range of components and devices in Read More >>

February 8, 2017

SCS Launches the PrecisionCoat BT Automated Coating/Dispensing System at IPC APEX

New compact system automates time-intensive manual coating and dispensing processes. (Indianapolis, IN) – Specialty Coating Systems (SCS) is pleased to announce that it will launch the new PrecisionCoat BT in Booth #2515 at the IPC APEX EXPO, taking place Feb. 14-16, 2017 at the San Diego Convention Center. Designed for companies looking to automate their Read More >>