SCS Precisioncoat V: Conformal Coating
The SCS Precisioncoat V conformal coating system precisely applies 100% solids, solvent-based and water-based coatings, such as photoresists, acrylics, adhesives and solder masks, to virtually any surface or substrate, with maximum accuracy. Common coating applications include:
- Circuit board assembles
- Fuel cells
- Photovoltaic arrays
The Precisioncoat’s standard configuration applies coatings with a direct-drive, three-axes system with an accuracy of 0.001 inches. Fully programmable fourth and fifth axes can be added for tilt and rotate functionality. The Precisioncoat is controlled by proprietary software on a Windows® operating system and features convenient offline programming and file backup.
Optional features, including programmable tilt and rotate, fiducial recognition, needle calibration, programmable atomization and laser-height mapping, are available to maximize efficiency and meet any production requirement. The system can also be tied to an integrated manufacturing system by means of SMEMA transfer standards. The SCS Precisioncoat has spray booth door and exhaust interlocks for safety.
The SCS Precisioncoat mates seamlessly with SCS Cure Ovens for inline UV and thermal curing. For more information, contact SCS.
Key Features and Benefits
- Ease of programming
- High accuracy and repeatability
- High throughput
- Multi-valve technology
- Profile sharing between multiple coating systems
- SMEMA transfer protocols
- Safety interlocks
- 5 axes programmable tilt and rotate
- Vision system
- Coating flow meter
- Needle calibration system
- Programmable atomization pressure
- Programmable coating pot pressure
- Material temperature control system
- Laser height mapping
- Valve on/off during continuous motion
For a full list of available features and
options, contact SCS.
|Minimum substrate size||2 x 2 in / 5.08 x 5.08 cm|
|Maximum substrate size||20 x 20 in / 50.8 x 50.8 cm|
|Maximum substrate height||5 in / 12.7 cm above and below pass line|
|Electrical||120 VAC, 6A; 230 VAC, 3.5A|
|Exhaust requirements||150 CFM exhaust with 6 in / 15 cm duct|
|Air supply||10 CFM @ 80 psi dry air (some moisture-sensitive materials may require use of nitrogen instead of clean, dry air)|
(W x D x H)
|39.0 x 49.5 x 67 in / 99.1 x 125.7 x 170.2 cm|
|Weight, skidded||820 lb / 372 kg|
The SCS Precisioncoat V spray and dispense system offers optional tilt and rotate capabilities.
SCS Precisioncoat: Conformal Coating
The SCS Precisioncoat provides more than a dependable layer of protection, it’s a total system solution that ensures accuracy, repeatability and high throughput for a wide range of automated material applications.